VDR MACHINING · PRECISION IN COMPOSITES

Complex shapes.
Perfectly machined.

Specialist in CNC and robotic machining of composites, phenolic laminates and engineering plastics. From a critical prototype to a reliable production run.

Emmeloord · The Netherlands · Partner for Composites

Stäubli milling robot machining a complex form
ROBOTIC MILLINGComplex geometry, controlled machining.
1500 × 3000 mmCNC working range
120 mmmax. CNC working height
6-assig / 2 mrobot reach in each direction
Prototype → seriesflexible production

01 / EXPERTISE

Where material behaviour and geometry meet.

Composites require more than a toolpath. Fixturing, tooling, dust control, fibre direction and end use together determine the right approach.

01

3-axis CNC milling

Accurate panel and contour work, drilling, pockets and functional milled geometries across a 1500 × 3000 mm working range.

02

6-axis robotic milling

For large or complex 3D forms, moulds and components that demand reach and flexibility. Stated machine tolerance: ±0.5 mm; project tolerances by agreement.

03

Prototype & production

From initial manufacturability review and trial part to small or larger production runs, with an approach that scales with the project.

04

Finishing & assembly

Drilling, finishing, fitting, inserts and assembly can be included when the finished part requires it.

Clear overview of the VDR Machining 3-axis CNC machineStäubli milling robot in the workshop

02 / MACHINES & MATERIALS

The right route for every material.

Machine selection follows geometry, dimensions, tolerance and material. This avoids unnecessary operations and keeps the process controlled.

Composites

  • CFRP / carbon
  • GFRP / glass fibre, incl. G11
  • Epoxy and polyester composites
  • Sandwich panels

Engineering materials

  • Phenolic laminate / fabric laminate / Tufnol
  • Epoxy and PU tooling board
  • POM, PE
  • Engineering foams and filled resins

03 / PROJECTS & APPLICATIONS

Technical solutions in practice.

A focused selection showing how VDR Machining combines machine capability, material behaviour and manufacturability.

Vacuum table with finely machined channel structure

01 / PHENOLIC TOOLING

Phenolic laminate vacuum tables

Precise contours and a fine network of vacuum channels, produced as functional production tooling.
Dimensional inspection of composite test specimens

02 / TEST SPECIMENS

Specimens for material testing

Controlled dimensions, parallelism and squareness for reliable and repeatable material tests.
Complex machined carbon-fibre component

03 / CFRP

Complex carbon work

Freeform geometry and crisp transitions in fibre-reinforced material, matched to fixturing, fibre direction and end use.
Stäubli robot milling a large complex form

04 / ROBOTIC MILLING

Large 3D geometries

Robotic reach and multi-sided access for geometries beyond conventional panel machining.
Series of machined composite brackets

05 / SERIES

Repeatable production runs

A controlled process for components that require consistent geometry, dimensions and finish from part to part.
Machined engineering-laminate components on the CNC machine

06 / ENGINEERING LAMINATES

Contours, drilling and pockets

Combined operations in engineering laminate, produced from one considered setup.

Not every project fits a standard process. VDR Machining assesses drawings, material, tolerances and production volume as one technical whole.

Discuss your application

04 / ABOUT VDR MACHINING

Technical partner for demanding machining.

VDR Machining supports customers in the precision machining of composites, phenolic laminates and engineering plastics. The organisation combines direct technical coordination with CNC and robotic capability to make complex components manufacturable, controlled and repeatable.

Technical coordinationMaterial, tolerances and fixturing are reviewed together early in the process.
Fit-for-purpose production routeCNC or robotic machining is selected based on geometry, reach and required repeatability.
From development to productionSupport for prototypes, one-off components and production runs.

05 / FREQUENTLY ASKED QUESTIONS

Practical questions about composite machining.

Short answers to common questions when requesting CNC or robotic machining.

Which composites can VDR Machining CNC machine?

Materials include CFRP/carbon fibre, GFRP/glass fibre including G11, epoxy and polyester composites, sandwich panels and phenolic laminate. The final approach depends on lay-up, geometry and tolerance.

When do you choose 3-axis CNC milling or robotic milling?

3-axis CNC milling suits panel, profile and pocket work. The 6-axis milling robot suits large or complex 3D forms and multi-sided access. The choice is reviewed for each project.

Which files are needed for a quotation?

Preferably a STEP file for 3D geometry or DXF for 2D profiles, plus material, quantities, critical tolerances, required finish and application.

Does VDR Machining also produce prototypes and small series?

Yes. The route can start with a manufacturability review and trial part, then scale to one-offs, small series or repeatable production runs.

How are tolerances for composite parts determined?

Achievable tolerances depend on material lay-up, dimensions, fixturing, tooling and machine choice. Critical dimensions are therefore discussed per drawing and application.

YOUR NEXT PROJECT

Challenge us.

Send VDR Machining a drawing, material question or initial idea. We will discuss which machine, fixturing and process route fit best.

info@vdrmachining.comEmmeloord, Flevoland, NL